Learning the Basics to Heavy Duty Equipment

Written by Business magazine. Posted in Heavy equipment oil coolers, Reman cat parts, Used cat parts

Komatsu reman parts

When working with heavy equipment, it is vital that everyone involved in the project is aware of the risks, and is properly trained and educated on all of the machinery in use and the protocols in place, particularly if something goes wrong. Heavy equipment hydraulic cylinders, for example, are just one element that operators need to be mindful of when in use. Heavy duty machines used for cutting edges or lifting materials are machines that require a great deal of knowledge to operate and a great deal of respect for the incredible power that they are capable of producing.

Heavy equipment hydraulic cylinders, construction cranes and more
Heavy equipment hydraulic cylinders are by far not the only mechanical elements to watch out for. Those working in construction or in other fields that also operate heavy machinery will know that there are potential dangers everywhere on the job, but with the proper training and awareness, not to mention years of exposure and experience, the risks lessen. But as with most professions, it may raise some concerns to have inexperienced individuals wandering around the job site, even if it comes from a place of innocent and harmless curiosity. Someone who is not trained will more than likely just be getting in the way. So be mindful of workers when you pass by, and do your best to steer clear of potential dangers so they can worry about getting the job done instead of worrying about an untrained individual getting hurt.

Heavy duty elements of the job

Perhaps you will be less likely to wander onto or near a construction site for the sake of curiosity if you have some basics under your belt. Then you may be able to watch the large machines working from afar without anyone getting into harm’s way, and the professionals can keep working unbothered. There are several different kinds of construction equipment, and a lot of those pieces can be counted on for a service life of about 15 years, of course with proper maintenance and tune ups when necessary. One type of machinery that is used is the kind that uses hydraulic logic elements, which can withstand any flow from as little as five to more than 5,000 gallons per minute, and at pressures of about 6,000 pounds per square inch or even higher than that. When these types of machines are not working properly, it could be any number of issues. Most often — about 75% of the time — fluid power failures are due to some sort of contamination, which can be reduced and eliminated with the use of hydraulic filters. Aside from that, unfortunately even professionals can get it wrong, and a common source of a piece of equipment breaking down is an error on the operator’s part, which is not covered under a warranty. This type of problem accounts for more than 35% of machinery failure.

It is intriguing to see heavy equipment in use. Part of our fascination undoubtedly comes from the fact that such brilliance was constructed from the human imagination. But imagination will only get us so far without the proper operating knowledge.

Leave a comment

You must be logged in to post a comment.